COVER SHEET TO AMENDMENT 9 3 INTERNATIONAL STANDARDS AIRWORTHINESS OF AIRCRAFT .\EX 8 TO THE CONVENTION ON NlTRNATIONAL a AVIATION SIXTH EDITION - JULY 1973 JPuI'ERNAT1ONA.L CIVIL A ATION ORGANIZATION
AMENDMENT 93 to the international Standards AIRWORTHINESS OF AIRCRAFT Annex 8 to the Convention on International Civil Aviation To incorporate Amendment 93 to Annex 8 isixth Edition which becomes applicable on 22 March 1985, please make the following changes 1. Replace page 4 - Table of Contents 2. Replace pages 5 to 9 - Foreword 3. Replace pages 16, 23, 24 - Internatha1 Standards, Part 111 4. Record entry of Amendment on Page 2.
Check-List of Amendments to Annex 8 Sixth Edition Effective Date Date of Applicability Sixth Edition incorporating Amendments 1 to 91. Amendment 92 adopted by the Council on 3 April 1974. . Amendment 9 3 .adopted by the Council on 22 March 1982. Replacement pages 4, 5 to 9, 16, 23 and 24. 3017173 3/8/74 22/7/82 23/5/74 27/2/75 22/3/85
TABLE OF CONTENTS ....................... FOREWORD 1 ..Certificate of Airworthiness .............. 3.-Proof of Compliance with Appropriate Airworthi- .................... ness Requirements 4 .-Continuing Airworthiness of Aircraft ....... 4.1 .-Determination of Continuing Airworthiness . 4.2.-Information Related to Continuing Airworthi- .................... ness of Aircraft 5.-Validity of Certificate of Airworthiness ...... 5.2.-Method of Rendering a Certificate of Air- ................... worthiness Valid .......... 6.-Temporary Loss of Airworthiness ......................... 6.1 .-General 6.2.-Damage to Aircraft ................. 7.-Standard Form of Certificate of Airworthiness . . 8.--Aircraft Limitations and Information ........ ...................... Chapter 1 ..General ..................... 1.1 .-Applicability 1.2.-Number of Power-units .............. ...................... 1.3.-Limitations 1.4.-Unsafe Features and Characteristics ...... ................ 1.5.-Proof of Compliance Chapter 2..Flight ....................... 2.1.-General ......................... 2.2.-Performance ...................... ...................... 2.2.1 .-General 2.2.2.-Minimum Performance ............ ......... 2.2.3.-Scheduling of Performance ................... 2.3.-Flying Qualities .................. 2.3.1.-Controllability 2.3.2.-Trim ........................ 2.3.3.-Stability ...................... ...................... 2.3.4.-Stalling ............. 2.3.5.-Flutter and Vibration Chapter 3..Structures .................... ........................ 3.2. -Airspeeds ................ 3.2.1 .-Design Airspeeds ............... 3.2.2.-Limiting Airspeeds 3.3.-Flight Loads ...................... 3.3.1 .-Manoeuvring Loads .............. .................... 3.3.2.-Gust Loads 3.4.-Ground and Water Loads ............. .............. 3.4.1.-Landing Conditions 3.5 -Miscellaneous Loads ................. 3.6.-Flutter, Divergence and Vibration ....... 3.7.-Fatigue Strength ................... Chapter 4.-Design and Constructibn .......... 4.1 .-General ......................... 4.1.1.-Substantiating Tests .............. 4.1.2.-Materials ..................... .............. 4.1.3.-Fabrication Methods 4.1.4.-Protection .................... 4.1.5.-Inspection Provisions ............. 4.1.6. -Design Features ................. 4.1.7.-Emergency Landing Provisions ....... 4.1.8.-Ground Handling ................ Chapter 5.-Engines ...................... .......................... 5.1.-Scope 5.2.-Design, Construction and Functioning ..... 5.3.-Declared Ratings, Conditions and Limitations ........................... 5.4.-Tests Chapter 6.-Propellers .................... .......................... 6.1.-Scope 6.2.-Design, Construction and Functioning ..... 6.3.-Declared Ratings, Conditions and Limitations 6.4.-Tests ........................... Chapter 7..Powerplant Installation ........... 7.1 .-General ......................... ............. 7.1.1.-Applicable Standards 7.1.2.-Compliance with Engine and Propeller .................... Limitations 7.1.3.-Control of Engine Rotation ......... 7.1.4.-Engine Restarting ................ .......... 7.2.-Arrangement and Functioning 7.2.1 .-Independence of Power-units ........ 7.2.2.-Propeller Vibration ............... ...................... 7.2.3.-Cooling 7.2.4.-Associated Systems .............. 7.2.5.-Fire Protection ................. . ...... 3.1 .-General 19 Chapter 8.-Instruments and Equipment 23 ......................... ...... 3.1.1.-Weight and Weight Distribution 19 8.1.-Required Instruments and Equipment ..... 23 3.1.2. -Limit Loads ................... 19 8.2.-Installation ...................... 23 .......... 3.1.3-Strength and Deformation 19 8.3.-Safety Equipment .................. 23 ANNEX 8
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ
ОБРАЗЕЦДля просмотра всей книги требуется Получить доступ